Below is the generally styles of corrugated boxes and structures:
Regular slotted container regular slotted container showing score lines, slots, and manufacturer's joint
A Full Overlap Box is similar to an RSC except the major flaps fully overlap.
A Half Slotted Container (HSC) Bottom or top normally used as a shroud (cap) or base (btm)
A Five Panel Folder is shipped flat to a packager without a manufacturer's joint and is often used for long items. The box has five long panels, one of which fully overlaps. The ends also fully overlap.
A Full Telescope Box has two fully telescoping sections. The sections may be formed by staples, die-cut locks, adhesive, etc.
A Partial Telescope Box has two sections. The top telescopes partially over the bottom.
A corrugated tray is often used for display purposes or used with a shrink wrap
Corrugated corner pads can be used for product support and cushioning
Special die-cut shapes have almost endless designs and uses.
The size of a box can be measured for either internal (for product fit) or external (for handling machinery or palletizng) dimensions. Boxes are usually specified and ordered by the internal dimensions.
our cutting table[cutting table?:sample maker cutting table] can cut all the styles of corrugated boxes, our cutting table can cut materials like corrugated, grey board[grey board?:grey board sample cutting machine], cardboard, can cut max 15mm corrugated, any styles of corrugated boxes.
